| MODEL |
DESCRIPTION |
VMC-1000 |
| Table |
Table Size, mm (inch) |
1100 x 610 (43.3 x 24) |
| Travel Ranges (X/ Y/ Z), mm (inch) |
1000 / 610 / 610 (39.3 / 24 / 24) |
| Max. Table Load, kgs |
850 |
| Spindle Nose To Table Surface, mm (inch) |
110-720 (4.3-28.3) |
| T-Slot (Width x Distance x Number), mm (inch) |
18 x 125 x 5 (0.7 x 4.9 x 5) |
| Spindle |
Tool Shank & Pull Stud |
BT 40 |
| Spindle Inner Diameter, mm (inch) |
Ø70 (2.7) |
| Spindle Center To Column, mm (inch) |
675 (26.5) |
| Spindle Speed, rpm |
60 - 8000 |
| Draw Bar Force, kgf |
950 |
| Feed Rate |
Rapid Feed Rate (X /Y /Z), M/min |
24 / 24 / 20
(Opt. Linear Guide 30 / 30 / 24) |
| Feed Rate (X /Y /Z), M/min |
10 |
| Motor |
Main Motor (con. / 30min), kw |
7.5 / 11 (11 / 15 BT 50) |
| AC Servo Motor |
Mitsubishi |
3.5 kw |
| Siemens |
2.9 kw |
| Fanuc |
β22i 2.5 kw or α12i 3.0 kw |
| Fagor |
FKM 64.30 A |
| Heidenhain |
2.47 kw |
Automatic
Tool Changer |
MAG Type |
Armless type / Arm type (Opt.) |
| Tool Storage Capacity (pcs) |
24 / 24 (16 / 24 , BT 50) |
| Max. Tool Diameter, mm (inch) |
Ø100 / Ø93 (3.9 / 3.6),
[Ø115 (4.5) BT 50] |
| Max. Tool Length , mm (inch) |
250 (9.8). [300 (11.8), BT 50] |
| Max. Tool Weight, kgs |
8 (15 BT 50) |
| Miscellaneous |
Air Requirement, kg/cm2 |
6 |
| Voltage |
220 / 380V, 3PH, 50 / 60Hz |
| Power Requirement |
20 KVA (25 KVA BT 50) |
| Machine Weight, kgs |
6000 |
| Floor Space (L x W x H), mm (inch) |
2920 x 2230 x 2950 (115 x 88 x 116) |
