| MODEL |
UNIT |
FMC-2000 |
| Table |
| Table Size |
mm/inch |
2100 x 850
(82.6" x 33.4") |
| Working Area |
mm/inch |
2000 x 900
(78.7" x 35.4") |
| Tee Slots (CD x W x No) |
mm |
CD 100 x 18 x 8 |
| Table Load (Maximum) |
kg/lbs |
3000 (6600) |
| Travel |
| X-Axis |
mm/inch |
2000 (78.7") |
| Y-Axis |
mm/inch |
900 (35.4") |
| Z-Axis |
mm/inch |
650 (25.5") op 800 (31.5") |
| Spindle Nose To Table Surface |
mm/inch |
120-770
(5"-30.3") |
| Spindle Center To Column Surface |
mm/inch |
975 (38.3") |
| X.Y.Z. Axis Ball Screws Dia |
mm |
50 x pitch 12 (C3) |
| Spindle |
| Spindle Tapper |
- |
BT NO.40 (Option BT NO.50) |
| Spindle Speed-Standard Access |
rpm |
Standard : 8000 OPT : 10000/12000 |
| Speed-Transmission |
rpm |
8000 (std) / 10000 (op) / 12000 (op) -Belt drive |
| op 10000 / 12000 / 15000 / 20000 rpm -Direct drive |
| 18000 / 24000 / 30000 rpm -Built-in |
| Feedrate |
| Cutting Feedrate (X, Y, Z Axis) |
mm/min |
1-5000 (Depending Controller) |
| 3Axes Slideways |
- |
HARDENED GROUND |
| Rapid Traverse Rates (X/Y/Z Axis) |
mm/min |
15000/15000/15000 |
| ATC |
| Capacity-Standard Access. |
pcs |
24 (Armless) |
| Capacity-Optional Access. (ARM) |
pcs |
24/30 (Disc Type), 32/40 (Chain Type) |
| Tool Selection |
- |
Bi-directional & min. path |
| Maximum Tool Diameter x Length |
mm/inch |
Armless Type : 89 x 250 (3.5" x 9.8"), Arm Type : 80 x 250 (3.14" x 9.8") |
| Maximum Tool Weight |
kg/lbs |
6 (13.2) |
| Air Power Required |
kg/cm2 |
6 |
| Tool Shank |
- |
BT40, ISO40 or CAT40 (Option) ISO50 or CAT50 |
| Motor |
| Spindle Drive Motor |
kw(HP) |
Standard : 15 KW (20 HP), OPTION : ZF gear box 11 KW (15 HP) |
| Coolant Pump |
HP |
1/2 |
| Power Supply |
- |
STD : 30 KVA |
| Net Weight |
kg/lbs |
17200 (37840) |
