DESCRIPTION |
2443VMC-#40 |
2443VMC-#50 |
| Table |
Table Size |
49" x 25.5" (1250 x 650 mm) |
T-Slots (No. x W x Dis.) |
5 x 0.7" x 4.9" (5 x 18 mm x 125 mm) |
Table Load |
2200 lbs (1000 kg ) |
Travel |
X Travel |
43" (1100 mm) |
| Y Travel |
23.9" (610 mm) |
| Z Travel |
24.9" (635 mm) |
| Spindle |
Spindle Nose To Table |
4.9" ~ 29.8" (125 ~ 760 mm) |
Spindle Center To Column |
26.9" (685 mm) |
| Spindle Taper |
7 / 24 (#40) |
#50 |
Spindle Speed |
Belt Drive |
80 ~ 8000 rpm
(opt.10000 / 12000 rpm) |
60 ~ 6000 rpm
(opt.8000 rpm) |
| Directly Coupled |
12000 / 15000 rpm |
10000 rpm |
| Spindle Diameter |
2.8" (70 mm) |
Feed Rates |
Rapid On (X / Y / Z) Axes |
787 / 787 / 709 ipm
(20 / 20 / 18 m / min.) |
787 / 787 / 591 ipm
(20 / 20 / 15 m / min.) |
Cutting Feed Rate |
1 ~ 7500 mm / min (0.04 ~ 300 ipm) |
| Diameter & Pitch Of Ballscrew |
40 mm, P10 |
| Accuracy |
VDI 3441 |
Positioning |
P  0.008 mm |
Repeatability |
PS 0.005 mm |
| Tool Changer |
Tool Capacity |
Carousel: 20 / Opt.Arm: 24
Opt. Chain: 32 |
Arm: 24
Opt. Chain: 32 |
| Changer Time |
Arm: T - T 1.8 sec, C-C 3.45 sec |
Tool Shank |
BT 40, CT 40 or DIN 40 |
BT 50, CT 50 or DIN 50 |
Pull Stud |
P40T-1 |
P50T-1 |
Max. Tool Diameter (With Adjacen Tool) |
3.9" (100 mm), 3" (76 mm) (opt.arm) |
4" (110 mm) |
| Max. Tool Diameter (Without Adjacen) |
120 mm |
Max. Tool Weight |
15 lbs (7 kg) |
32 lbs (15 kg) |
Motor |
Spindle Motor |
15 HP (30 min),  8 / 8000 |
20 HP (30 min), P22 / 6000 |
Drive Motor (X,Y,Z ) |
2.5 kW |
4.0 kW |
Coolant Pump |
1/2 HP (0.38 kw) |
General |
Power Required |
25 KVA |
30 KVA |
Air Required |
5.5 kg / cm2, 200 L / min |
Floor Space ( L x W x H ) |
120" x 88.2" x 103" (3060 x 2250 x 2635 mm) |
Machine Net Weight, Approx |
16500 lbs (7500kg) |
17380 lbs (7900kg) |
